ePoster Submission: If you want to submit an ePoster (electronic poster contribution), please use the ePoster submission form online to send us your abstract - More Info
ePoster size: A0 format (width: 841 mm x Height: 1189 mm) (Portrait) / PDF Format / Size < 5Mb. This file will be requested once the abstract submitted is approved. Organisers will send a special link to submit it.

Important note:
All ePosters approved will be available online in the website (abstract + ePoster) / An "ePoster session" will be organised during the conference to enhance networking and provide high-visibility to this type of contribution
     
 
ePOSTERS (30)
Antonio Agresti (C.H.O.S.E., University of Rome Tor Vergata, Italy)
MXene-based perovskite photovoltaics: a general approach for efficient and scalable devices.
Natalia Alzate-Carvajal (University of Ottawa, Canada)
Graphene chemiresistors for gas sensing
Dobri Atanassov Batovski (Assumption University of Thailand, Thailand)
Multidisciplinary Research on Graphene Biosensors
Andreas Becker (IHP - Leibniz-Institut für innovative Mikroeletronik, Germany)
Investigating the quality of CVD-grown graphene on germanium using in-situ surface science methods
Melkamu Belete (AMO GmbH, Germany)
Non-volatile Resistive Switching in Nanocrystalline MoS2 with Vertically Aligned Layers Enabled by Mobile Ions
Gabriele Bianca (Istituto Italiano di Tecnologia, Italy)
Liquid-phase exfoliated GeSe nanoflakes for photoelectrochemical-type photodetectors
Luca Cervini (Lancaster University, UK)
Short-Range Ordered Structure of Activated Carbons
Raquel Costa-Almeida (i3S - Universidade do Porto, Portugal)
Photothermal cancer therapy with graphene-based materials and their drug conjugates
Alessandro Cultrera (INRIM - Istituto Nazionale di Ricerca Metrologica, Italy)
EMPIR GRACE - Good Practice Guides on the electrical characterisation of graphene using contact- and non-contact methods
Tiago Gomes (Universidade do Porto, Portugal)
Temporal measurement of few-cycle laser pulses by third-harmonic dispersion-scan with optically improved graphene coatings
Kamrul Hassan (The University of Adelaide, Australia)
A bio-inspired fractal designed breath sensors fabricated by graphene inks using extrusion 3D printing
Amanpreet Kaur (Guru Nanak Dev University Amritsar, India)
Unveiling the tunneling phenomena in graphene-graphene homojunctions for emerging device applications
Yeuh-Hui Lin (KYU, Taiwan)
A Novel Method to Form Carbon Nanocomposites
Maximina Luis-Sunga (University of La Laguna, Spain)
Graphene-based electrocatalysts for the oxygen evolution reaction
Paolo Mariani (Università di Roma Tor Vergata - CHOSE, Italy)
Graphene-based counter-electrode for large area gold-free perovskite solar devices
Maryam Modares (Abalonyx AS, Norway)
Review of Graphene Oxide for anti-bacterial and anti-viral functions
Aybey Mogulkoc (Ankara University, Turkey)
2D Van der Waals Lateral Spin Valve
Miguel Monteiro (International Iberian Nanotechnology Laboratory, Portugal)
Graphene-based dispersions for touch sensor fabrication
Himadri Pandey (AMO GmbH, Germany)
Graphene Processing on Wafer Scale for Microelectronic Applications
Sara Pescetelli (C.H.O.S.E., University of Rome Tor Vergata, Italy)
Perovskite solar panels: an innovative highlight achieved by 2D materials
Marco Piccinni (Istituto Italiano di Tecnologia, Italy)
Solution-processed Layered Double Hydroxides for Energy Applications
Salvatore Polverino (Università degli studi di Genova, Italy)
Few-layers graphene-based cement composites
Adrian Romani Vazquez (TU Dresden, Germany)
Beyond the lab: Scalable production of electrochemically exfoliated graphene / transition metal oxide hybrids for wearable energy storage
Maxim Rybin (General Physics Institute, Russia)
Effective approach for graphene electron structure characterization
Jin-Wei Shi (KYU, Taiwan)
One-step Self-assembly for Producing Graphene and Carbon Nanocapsules
Smita Talande (RCPTM, Czech Republic)
Chemical Tuning of Specific Capacitance in Functionalized Fluorographene
Bernat Terrés (ICFO, Spain)
Ultrafast electro-absorption graphene modulators with a 2D-3D integration of hBN and a high-κ dielectric
Hasan Burkay Uzlu (AMO GmbH, Germany)
Gate-tunable graphene-based Hall sensors on flexible substrates with increased sensitivity
Pei Lay Yap (The University of Adelaide, Australia)
Multithiol Functionalized Graphene Bio-Sponge for Efficient Removal of Heavy Metal Ions in Water
Marilena Isabella Zappia (Bedimensional S.p.a., Italy)
Solution-processed GaSe nanoflake-based films for photoelectrochemical water splitting
30/30
Flash Poster : All ePoster contributions will be evaluated by Scientific/Organising Committees. You ePoster can be approved for:
- Only ePoster or
- Flash Poster + ePoster
Instructions: The 5 minutes Flash Poster contribution consists of a 3 Power Point slides related with the presented ePoster. This presentation should be sent to Organisers 2 days before the online conference.
Limited number of "Flash Poster" slots will be available.
All Flash Posters approved will be available online in the website (abstract + ePoster + Presentation)
FLASH POSTERS (9)
Aleandro Antidormi (ICN2, Catalan Institute of NanoScience and Nanotechnology, Spain)
Disordered Graphene Materials: Atomistic Characterization and Performances
Julio Chacon (Yachay Tech University, Ecuador)
Revealing supramolecular interactions in graphene-chitosan composites
Erik Khranovskyy (GRAFREN AB, Sweden)
Cost efficient washing and purification process for graphene oxide manufacturing at industrial scale
Dong Jin Kim (Seoul National University, South Korea)
Confocal Laser Scanning Microscopy as a Real-time Quality-assessment Tool for Industrial Graphene Synthesis
Sha Li (AMO GmbH, Germany)
Graphene Wafer Scale Integration
Martin R. Lohe (Sixonia Tech GmbH, Germany)
Functionalized Few-Layer-Graphenes: High Quality and Outstanding Processability without Compromises
Roberto Muñoz (Materials Science Institute of Madrid, Spain)
Direct growth of graphene on MoS2: Towards Van der Waals heterostructures
Stefano Razza (C.H.O.S.E., University Of Rome Tor Vergata, Italy)
Laser Processing optimization for 2D materials-perovskite solar modules
Albert Schnieders (CNM Technologies GmbH, Germany)
Water Filtration with Carbon Nanomembranes
9/9
ePoster Breakout Room 1 - Photonics and Solar. Chairperson: Francesco Bonaccorso (9)
Antonio Agresti (C.H.O.S.E., University of Rome Tor Vergata, Italy)
MXene-based perovskite photovoltaics: a general approach for efficient and scalable devices.
Gabriele Bianca (Istituto Italiano di Tecnologia, Italy)
Liquid-phase exfoliated GeSe nanoflakes for photoelectrochemical-type photodetectors
Tiago Gomes (Universidade do Porto, Portugal)
Temporal measurement of few-cycle laser pulses by third-harmonic dispersion-scan with optically improved graphene coatings
Dong Jin Kim (Seoul National University, South Korea)
Confocal Laser Scanning Microscopy as a Real-time Quality-assessment Tool for Industrial Graphene Synthesis
Roberto Muñoz (Materials Science Institute of Madrid, Spain)
Direct growth of graphene on MoS2: Towards Van der Waals heterostructures
Sara Pescetelli (C.H.O.S.E., University of Rome Tor Vergata, Italy)
Perovskite solar panels: an innovative highlight achieved by 2D materials
Stefano Razza (C.H.O.S.E., University Of Rome Tor Vergata, Italy)
Laser Processing optimization for 2D materials-perovskite solar modules
Adrian Romani Vazquez (TU Dresden, Germany)
Beyond the lab: Scalable production of electrochemically exfoliated graphene / transition metal oxide hybrids for wearable energy storage
Bernat Terrés (ICFO, Spain)
Ultrafast electro-absorption graphene modulators with a 2D-3D integration of hBN and a high-κ dielectric
17 Participants in Room 1
ePoster Breakout Room 2 - Health and biosensors. Chairperson: Vincent Bouchiat (10)
Natalia Alzate-Carvajal (University of Ottawa, Canada)
Graphene chemiresistors for gas sensing
Dobri Atanassov Batovski (Assumption University of Thailand, Thailand)
Multidisciplinary Research on Graphene Biosensors
Julio Chacon (Yachay Tech University, Ecuador)
Revealing supramolecular interactions in graphene-chitosan composites
Raquel Costa-Almeida (i3S - Universidade do Porto, Portugal)
Photothermal cancer therapy with graphene-based materials and their drug conjugates
Kamrul Hassan (The University of Adelaide, Australia)
A bio-inspired fractal designed breath sensors fabricated by graphene inks using extrusion 3D printing
Maryam Modares (Abalonyx AS, Norway)
Review of Graphene Oxide for anti-bacterial and anti-viral functions
Miguel Monteiro (International Iberian Nanotechnology Laboratory, Portugal)
Graphene-based dispersions for touch sensor fabrication
Albert Schnieders (CNM Technologies GmbH, Germany)
Water Filtration with Carbon Nanomembranes
Pei Lay Yap (The University of Adelaide, Australia)
Multithiol Functionalized Graphene Bio-Sponge for Efficient Removal of Heavy Metal Ions in Water
Marilena Isabella Zappia (Bedimensional S.p.a., Italy)
Solution-processed GaSe nanoflake-based films for photoelectrochemical water splitting
14 Participants in Room 2
ePoster Breakout Room 3 - Devices/Growth/Integration. Chairperson: Amaia Zurutuza (10)
Andreas Becker (IHP - Leibniz-Institut für innovative Mikroeletronik, Germany)
Investigating the quality of CVD-grown graphene on germanium using in-situ surface science methods
Melkamu Belete (AMO GmbH, Germany)
Non-volatile Resistive Switching in Nanocrystalline MoS2 with Vertically Aligned Layers Enabled by Mobile Ions
Alessandro Cultrera (INRIM - Istituto Nazionale di Ricerca Metrologica, Italy)
EMPIR GRACE - Good Practice Guides on the electrical characterisation of graphene using contact- and non-contact methods
Amanpreet Kaur (Guru Nanak Dev University Amritsar, India)
Unveiling the tunneling phenomena in graphene-graphene homojunctions for emerging device applications
Sha Li (AMO GmbH, Germany)
Graphene Wafer Scale Integration
Paolo Mariani (Università di Roma Tor Vergata - CHOSE, Italy)
Graphene-based counter-electrode for large area gold-free perovskite solar devices
Aybey Mogulkoc (Ankara University, Turkey)
2D Van der Waals Lateral Spin Valve
Himadri Pandey (AMO GmbH, Germany)
Graphene Processing on Wafer Scale for Microelectronic Applications
Smita Talande (RCPTM, Czech Republic)
Chemical Tuning of Specific Capacitance in Functionalized Fluorographene
Hasan Burkay Uzlu (AMO GmbH, Germany)
Gate-tunable graphene-based Hall sensors on flexible substrates with increased sensitivity
20 Participants in Room 3
ePoster Breakout Room 4 - Composites. Chairperson: Siva Bohm (10)
Aleandro Antidormi (ICN2, Catalan Institute of NanoScience and Nanotechnology, Spain)
Disordered Graphene Materials: Atomistic Characterization and Performances
Luca Cervini (Lancaster University, UK)
Short-Range Ordered Structure of Activated Carbons
Erik Khranovskyy (GRAFREN AB, Sweden)
Cost efficient washing and purification process for graphene oxide manufacturing at industrial scale
Yeuh-Hui Lin (KYU, Taiwan)
A Novel Method to Form Carbon Nanocomposites
Martin R. Lohe (Sixonia Tech GmbH, Germany)
Functionalized Few-Layer-Graphenes: High Quality and Outstanding Processability without Compromises
Maximina Luis-Sunga (University of La Laguna, Spain)
Graphene-based electrocatalysts for the oxygen evolution reaction
Marco Piccinni (Istituto Italiano di Tecnologia, Italy)
Solution-processed Layered Double Hydroxides for Energy Applications
Salvatore Polverino (Università degli studi di Genova, Italy)
Few-layers graphene-based cement composites
Maxim Rybin (General Physics Institute, Russia)
Effective approach for graphene electron structure characterization
Jin-Wei Shi (KYU, Taiwan)
One-step Self-assembly for Producing Graphene and Carbon Nanocapsules
15 Participants in Room 4
Sitemap  

© Phantoms Foundation 2020